歡迎來到棗莊鑫金山智能裝備有限公司官方網站 詳情請致電:400-699-7511

                                            砂石同出機制砂系統

                                            砂石同出機制砂系統

                                            針對混凝土市場需求的“砂石同出”系統,使用的是德國原裝的“雙腔”制砂機,使得該系統具有性能穩定可靠的優勢,除此之外,工藝簡潔、動力選粉,耗能低(單電機配置、耗能降低40%以上)、出砂率高(成品達50%以上)等優勢也是市場上的傳統制砂機所不具備的。

                                             

                                            砂石同出

                                             

                                             

                                                   砂、石同出300tph制砂系統 —— 混凝土攪拌站/300TPH SAND AND AGGREGATE MAKING SYSTEM—CONCRETE MIXING PLANT 

                                            •               本系統機制砂顆粒級配和級配類別符合建設用砂GB/T14684-2011建設用砂guojia標準。
                                            •               砂的石粉含量≤10.0,含泥量≤3.0%,泥塊含量≤1.0%。
                                            •               當機制砂MB值≤1.4或快速法試驗合格,石粉含量≤10.0%,泥塊含量≤1.0;
                                            •               當機制砂MB值>1.4或快速法試驗合格,石粉含量≤3.0%,泥塊含量≤1.0%。
                                            •               采用硫酸鈉溶液法進行試驗,砂的質量損失≤8.0%;單級zui大壓碎指標≤25%;
                                            •               砂的表觀密度不小于2500kg/m³,松散堆積密度不小于1400kg/m³,空隙率不大于44%。
                                            •  
                                            •               The mechanical sand size grading and grading categories of the system conforms to National Standard GB/T14684-2011 Sand for Construction.
                                            •               Stone powder content of sands ≤10.0; silt content≤3.0%; clay lump content ≤1.0%.
                                            •               When MB value of mechanical sand ≤1.4 or the fast test is qualified, the stone powder ≤10.0% and the clay lump content ≤1.0%.
                                            •               When MB value of mechanical sand >1.4 or the fast test is qualified, the stone powder ≤3.0% and the clay lump content ≤1.0%.
                                            •               When the sulfate solution method is adopted to conduct a test, quality loss of sands ≤8.0%; the max. single stage crushing index ≤25%;
                                            •               Apparent density of sands not <2500kg/m3; loose bulk density not <1400kg/m3; porosity not >44%.

                                             

                                                   設備選型叁數表/PARAMETER LIST

                                             

                                             

                                                   研發理念/R&D CONCEPT

                                                   系統優勢/ADVANTAGES

                                                   原材料的要求/REQUIREMENTS ON RAW STONE MATERIALS

                                            給您致電

                                            *您的姓名:
                                            *聯系電話:
                                                物    料:
                                                產    量:
                                             需求說明:

                                            聯系我們

                                            国产久草视频